Metal Plant Stand & Room Divider – 47" 2-Tier Freestanding Plant Screen, Indoor & Outdoor

A plant stand that also divides your space.

Two tiers of plants, and a welded steel mesh panel that quietly separates one area 
from the next. Stand it alone, or line up a few to screen a longer run — indoors 
or out.

• Two jobs, one piece — a 2-tier plant shelf with a welded diamond mesh back panel 
  that doubles as a low divider
• 35.43" tall — low enough to divide a space without closing it in, so light, air, 
  and conversation still flow
• Welded diamond mesh in 3.5 mm steel wire — welded at every crossing, not woven or 
  clipped, so the grid stays rigid and never develops loose strands
• 440 lb total capacity, fully seam-welded — 220 lb per tier on a steel frame joined 
  with full seam welds instead of spot welds
• Something for your plants to climb — the welded grid is strong enough for vines, so 
  the divider turns into a living green screen over a season
• Modular by design — line up 2, 3, or 4 to screen a longer run, with decorative 
  scrollwork keeping the ends looking finished
• Adjustable leveling feet with protective pads — twist each foot to sit flat on 
  uneven concrete, decking, or stone, so it never rocks. At 31 lb the stand itself 
  stays planted, and the pads keep surfaces scratch-free
• Slim footprint — 12.6" deep overall on a 9.84" base, narrow enough to run along a 
  wall, a window, or between tables, even in small spaces
• Rust-resistant powder-coated steel — phosphated steel means we treat the frame, 
  not just paint it
• Assembles in minutes — all components, hardware, and illustrated instructions 
  included

USE IT TWO WAYS

AS A PLANT STAND
Two tiers with 20" of clearance between them. Trailing plants spill over the lower 
shelf, taller pots sit up top with nothing overhead, and the scrollwork behind the 
top tier gives the whole piece a finished garden-room look.

AS A LOW DIVIDER
At 35.43" tall, this is a low divider — the kind that separates seating zones, hides 
table legs and storage, and defines an area without blocking sightlines or light. 
The mesh panel breaks up a view rather than hiding it, so a space feels divided 
without feeling closed off.

That makes it a natural fit for dining rooms, home offices, balconies, patios, 
cafes, and restaurant seating.

HOW MANY WILL I NEED?
Each unit is 47.24" long. Leave a 1–2" gap between units so each stays easy to move 
for cleaning.

  2 units  →  about 8 ft
  3 units  →  about 12 ft
  4 units  →  about 16 ft

Most setups use 2 or 3.

DIMENSIONS
Overall: 47.24" L × 12.6" W × 35.43" H
Base footprint depth: 9.84"
Lower shelf height: 6.3" off the floor
Clearance between tiers: 20.08"
Top rail height: 9.06" above the top tier
Load capacity: 220 lb per tier / 440 lb total
Net weight: 31 lb
Frame: Phosphated steel, powder coated, fully seam-welded
Panel: Welded diamond mesh, 3.5 mm (0.14") steel wire
Feet: Adjustable leveling feet with protective pads (all four legs)

Indoor & outdoor use.